ESP-3WAY1.6 Pre-Etched Sleepers 1.6mm (4mm scale) Three Way Points Brand_Bigjigs-Toys supplied with NO control board

supplied with NO control board

These signals can be run from a 9 - 15V AC or DC input and can be controlled via DCC decoder or traditional non-DCC methods

15x Pieces of Track

This is detected by Gold and Silver decoders as well as the new 10231-02 Standard

Powerful 3 Pole Motor

ESP-3WAY1.6 Pre-Etched Sleepers 1.6mm (4mm scale) Three Way Points Brand_Bigjigs-Toys supplied with NO control boardPre Etched Sleepers 1. 6mm (4mm scale) Three Way Points. 4mm scale UK prototype 3 way Point sleepering, pre etched. This fret contains enough correct length sleepers to allow a three way point to be constructed. Sleepers are 1. 6mm thick for direct soldered construction.